What is the best tool to scrape off old paint?

What is the best tool to remove paint from wood?

This is a discussion on ?

It was . What is the best tool to remove paint from wood? It was my first time having any kind of "tool" so I learned how to put together it, and then how to use it. In the process I found out that using a handsaw, I'm a fast worker! LOL! Next thing I knew, I was painting an 8x4 wall with the power washer and spray-painting, but with this new found dexterity, I really started getting the hang of using this saw. Well, I used it to take a board off of my garage floor. I sanded all the way down about a 1/16th of an inch of the board. (I have a little square on my saw so the board isn't going to slip.)

The end grain has this really nice look and I wanted it to remain the same. So, I ran my blade along the board, about 2 or 3 times, being careful not to hit too much into the board (I was trying to use the blade as straight as possible).

Once the board was ready, I hit it into the middle of the blade. When I made the cut, I held it there for a second or two so the dust would catch in a piece of paper or cloth I had laying on the board. I just wanted the extra dust from when I hit the blade so I wouldn't spread it everywhere while cutting. After a couple of minutes, I pulled the blade and let go of the handle to see what happened to my board! The piece of sandpaper I had on was holding up a good portion of the board. (My board was 5/8s of an inch thick.) That's great and makes my saw handy, don't you think?

But on to the question I posed: I was wondering what the best tool for taking paint off wood, I have yet to get my hands dirty.

What is the best tool to remove loose paint?

It all depends on the paint and what you mean by loose.

There are several tools available that will remove paint from a surface, but to achieve your goal, you'd probably want a combination of multiple tools. Sandpaper is not one of those multi-use tools (there's too much waste). I've never used paint stripper, but it's a viable option. For painting I've gone with Krylon's quickn'set that removes paint with vinegar and baking soda mixture, plus plenty of scraping until it comes up smooth.

Sand paper works best for rough surfaces. It also helps expose areas with less paint to get the paint off. For smoothing out the surface and getting rid of paint in hard to reach places I'll use a small amount of compressed air. A good high powered electric drill or even drill press will remove most or all paint depending on your budget.

Sanding will be your best tool (along with elbow grease, if necessary) for removing paint from the floor. Get a really fine grit sander (I used a mini orbital sander) and just sand until it comes up nice and smooth.

You don't need very much power for that, it's a pretty forgiving operation. You should definitely buy yourself a nice sander from Lowe's or Home Depot.

This may damage your floor over time, depending on how much paint was on it. It's also great to have a few good quality steel bristle brushes, because you'll need them for polishing and staining. If there's any other paint under the first coat of paint, then you can use high-speed power tools (drill/sander combo will help), but it's risky to try and do that in a rental car parking lot! Then use whatever tool you would normally use to remove paint, to clean up and finish the project.

What is the best tool to scrape off old paint?

This is a great question, and one that we're sure everyone has asked themselves at some point.

There's just something about knowing that it's time to finally paint your walls that makes your heart jump. And since we're so fond of the idea of wall painting, we decided to make your job of scraping out the old easier by picking out some of the best tools out there. So, without further ado, here's the ultimate guide on which scraper will help you get it done.

We all know how easy it is to get paint on a nice new piece of furniture. That's what this is for. A fine piece of steel that's perfectly capable of scraping off old painted pieces. It may not go quite as smoothly as your typical wood scraper, but the benefits are clear, fast cleanup, durability, safety, and cost.35) from Pangolin: For a more traditional look, there's nothing better than using the original wood scraper design. This is definitely the one for you. The handle won't slip, and if you ever need a replacement head (which you will), just use a new blade or replace the entire thing.

Forget the wood, the original version is still the way to go.05): This model is identical to the first, but with a metal handle. If you're the kind of person who doesn't care much about look, we'd suggest this. If not, stick to the first model.

A sturdy wood scraper with a metal handle.55) from Rockler Woodworking: A true woodscraper, this would be the go-to tool of those people who make a daily habit of scrapping their own furniture. It even comes with an extra bit. It's made of hard maple, too, which will make your work much smoother.

A genuine woodscraper made of the same stuff as your everyday kitchen cutlery.99): Like the other model, this comes with a metal handle and an excellent warranty. We'll give you the same advice as before: if you want a metal scraper, don't go after wood, go after aluminum.